* Sea-Bird SBE 9 Data File:
* FileName = D:\Poseidon303\raw\p303_656.HDR
* Software Version Seasave Win32 V 5.25b
* Temperature SN = 1526
* Conductivity SN = 1222
* Number of Bytes Per Scan = 18
* Number of Voltage Words = 2
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Sep 15 2003 02:39:58
** Ship:      POSEIDON 
** Cruise:    303 / 1 
** Station:    656
** Latitude:   66 25.74 N
** Longitude:  26 30.54 W
** Waterdepth:  596
# nquan = 4
# nvalues = 578                         
# units = specified
# name 0 = timeJ: Julian Days
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = sal00: Salinity, Practical [PSU]
# span 0 = 258.112859, 258.122067       
# span 1 =      5.000,    582.000       
# span 2 =    -1.6492,     5.3022       
# span 3 =    33.3690,    34.9170       
# interval = decibars: 1                
# start_time = Sep 15 2003 02:39:58 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="7" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1526</SerialNumber>
#       <CalibrationDate>10 Jan 03</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.84102920e-003</G>
#       <H>6.76454551e-004</H>
#       <I>2.65086665e-005</I>
#       <J>2.11038139e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1222</SerialNumber>
#       <CalibrationDate>22 Jan 03</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.23258381e+000</G>
#         <H>5.19998963e-001</H>
#         <I>9.41267224e-005</I>
#         <J>2.19060462e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>53573</SerialNumber>
#       <CalibrationDate>17 Jun 93</CalibrationDate>
#       <C1>-4.205900e+004</C1>
#       <C2>7.281248e-001</C2>
#       <C3>1.440120e-002</C3>
#       <D1>3.829500e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.007821e+001</T1>
#       <T2>-2.378979e-005</T2>
#       <T3>4.220180e-006</T3>
#       <T4>4.638640e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>-2.50000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.136000e-002</AD590M>
#       <AD590B>-8.386160e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>400</SerialNumber>
#       <CalibrationDate>heute</CalibrationDate>
#       <ScaleFactor>5.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Oxygen Current, Beckman/YSI -->
#     <OxygenSensor SensorID="36" >
#       <SerialNumber>130366</SerialNumber>
#       <CalibrationDate>13 Jan 03</CalibrationDate>
#       <M>2.4554e-007</M>
#       <B>-9.3305e-010</B>
#       <Soc>2.8699</Soc>
#       <Boc>-0.0347</Boc>
#       <Tcor>-0.0330</Tcor>
#       <Pcor>1.50e-004</Pcor>
#       <Tau>2.0</Tau>
#       <Wt>0.67</Wt>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Oxygen Temperature, Beckman/YSI -->
#     <OxygenSensor SensorID="39" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <K>9.0134</K>
#       <C>-6.8040</C>
#     </OxygenSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 15 2013 14:44:38, 7.21a [datcnv_vars = 5]
# datcnv_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.dat C:\Daten\POSEIDON\POS303\IFM\p303_656.CON
# datcnv_skipover = 3450
# wildedit_date = Feb 20 2013 14:19:55, 7.21a
# wildedit_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 0.000e+000
# wildedit_npoint = 50
# wildedit_vars = prDM
# wildedit_excl_bad_scans = yes
# filter_date = Feb 20 2013 14:24:25, 7.21a
# filter_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM
# alignctd_date = Feb 20 2013 14:28:06, 7.21a
# alignctd_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv
# alignctd_adv = c0mS/cm -0.040                                                                                                                                                                                                      
# celltm_date = Feb 20 2013 14:31:22, 7.21a
# celltm_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv
# celltm_alpha = 0.0300, 0.0000
# celltm_tau = 7.0000, 0.0000
# celltm_temp_sensor_use_for_cond = primary, 
# loopedit_date = Feb 20 2013 14:34:14, 7.21a
# loopedit_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv
# loopedit_minVelocity = 0.250                                                                                            
# loopedit_surfaceSoak: minDepth = 5.0, maxDepth = 20, useDeckPress = 1                                                   
# loopedit_excl_bad_scans = yes
# Derive_date = Feb 20 2013 14:40:10, 7.21a [derive_vars = 1]
# Derive_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv C:\Daten\POSEIDON\POS303\IFM\p303_656.CON
# wfilter_date = Feb 20 2013 14:43:31, 7.21a
# wfilter_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv
# wfilter_excl_bad_scans = yes
# wfilter_action t090C = median, 25
# wfilter_action c0mS/cm = median, 25
# wfilter_action sal00 = median, 25
# binavg_date = Feb 20 2013 14:53:20, 7.21a
# binavg_in = C:\Daten\POSEIDON\POS303\IFM\p303_656.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*