* Sea-Bird SBE 9 Data File:
* FileName = C:\seasoft\b201101\b0006.hex
* Software Version Seasave V 7.21a
* Temperature SN = 4460
* Conductivity SN = 2910
* Number of Bytes Per Scan = 35
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 4
* Append System Time to Every Scan
* System UpLoad Time = Feb 10 2011 00:42:03
* NMEA Latitude = 65 30.18 N
* NMEA Longitude = 024 34.43 W
* NMEA UTC (Time) = Feb 10 2011 00:42:19
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1d
* number of scans to average = 4
* pressure baud rate = 9600
* NMEA baud rate = 4800
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* delete word 3 from scan
* delete word 4 from scan
* S>
** Stn: 0006
** Lat: 65 30.10 N
** Lon: 24 34.29 W
** Depth: 35
** Name: LB1
** Title: Latrabjarg 1
* System UTC = Feb 10 2011 00:42:03
# nquan = 10
# nvalues = 34                          
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0S/m: Conductivity [S/m]
# name 3 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 4 = scan: Scan Count
# name 5 = sal00: Salinity, Practical [PSU]
# name 6 = potemp090C: Potential Temperature [ITS-90, deg C]
# name 7 = sigma-é00: Density [sigma-theta, Kg/m^3]
# name 8 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
# name 9 = flag: flag
# span 0 =      3.000,     36.000       
# span 1 =     1.2319,     1.2991       
# span 2 =   2.966855,   2.974959       
# span 3 =     2.6742,     2.6778       
# span 4 =         62,        336       
# span 5 =    34.4393,    34.4496       
# span 6 =     1.2318,     1.2975       
# span 7 =    27.5790,    27.5827       
# span 8 =    7.03552,    7.06860       
# span 9 = 0.0000e+00, 0.0000e+00       
# interval = decibars: 1                
# start_time = Feb 10 2011 00:42:03 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4460</SerialNumber>
#       <CalibrationDate>27-MAY-2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.39789616e-003</G>
#       <H>6.36179804e-004</H>
#       <I>2.11800249e-005</I>
#       <J>1.85727430e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2910</SerialNumber>
#       <CalibrationDate>27-MAY-2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>1.00835607e-003</A>
#         <B>4.96583876e-001</B>
#         <C>-4.15376152e+000</C>
#         <D>8.24068378e-004</D>
#         <M>2.8</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.93537933e+000</G>
#         <H>1.38216170e+000</H>
#         <I>1.36888006e-004</I>
#         <J>6.13459108e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>35944</SerialNumber>
#       <CalibrationDate>12-MAR-2007</CalibrationDate>
#       <C1>-2.016030e+004</C1>
#       <C2>9.385644e-001</C2>
#       <C3>4.860885e-003</C3>
#       <D1>3.732929e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.130642e+001</T1>
#       <T2>4.935261e-004</T2>
#       <T3>3.999643e-006</T3>
#       <T4>0.000000e+000</T4>
#       <Slope>0.99994000</Slope>
#       <Offset>-0.13050</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.110000e-002</AD590M>
#       <AD590B>-8.706400e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1040</SerialNumber>
#       <CalibrationDate>12-JUL-2008</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>4.1670e-001</Soc>
#         <offset>-0.5119</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>0.0017</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.1760e-001</Soc>
#         <offset>-0.5147</offset>
#         <A> 1.0077e-003</A>
#         <B> 8.5514e-005</B>
#         <C>-2.3712e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.96400e-004</D1>
#         <D2>-4.17760e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 2.3700</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Free -->
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Free -->
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>42467</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>14.821</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Feb 10 2011 01:54:55, 7.21a [datcnv_vars = 5]
# datcnv_in = L:\data\pc\b201101\b0006.hex L:\data\pc\b201101\b201101.con
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# filter_date = Feb 10 2011 01:54:55, 7.21a
# filter_in = L:\data\pc\b201101\cnv\b0006.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars = c0S/m
# filter_low_pass_B_vars = prDM
# alignctd_date = Feb 10 2011 01:54:56, 7.21a
# alignctd_in = L:\data\pc\b201101\cnv\b0006.cnv
# alignctd_adv = sbeox0V 4.000                                                                                                                                                                                                       
# celltm_date = Feb 10 2011 01:54:56, 7.21a
# celltm_in = L:\data\pc\b201101\cnv\b0006.cnv
# celltm_alpha = 0.0300, 0.0000
# celltm_tau = 7.0000, 0.0000
# celltm_temp_sensor_use_for_cond = primary, 
# loopedit_date = Feb 10 2011 01:54:56, 7.21a
# loopedit_in = L:\data\pc\b201101\cnv\b0006.cnv
# loopedit_minVelocity = 0.250                                                                                            
# loopedit_surfaceSoak: do not remove                                                                                     
# loopedit_excl_bad_scans = yes
# Derive_date = Feb 10 2011 01:54:56, 7.21a [derive_vars = 4]
# Derive_in = L:\data\pc\b201101\cnv\b0006.cnv L:\data\pc\b201101\b201101.con
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Feb 10 2011 01:54:56, 7.21a
# binavg_in = L:\data\pc\b201101\cnv\b0006.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
      3.000     1.2319   2.966855     2.6742         62    34.4393     1.2318    27.5790    7.05016 0.0000e+00
      4.000     1.2329   2.966988     2.6769        130    34.4393     1.2327    27.5790    7.03552 0.0000e+00
      5.000     1.2377   2.967475     2.6765        135    34.4397     1.2375    27.5790    7.04258 0.0000e+00
      6.000     1.2385   2.967626     2.6765        141    34.4401     1.2382    27.5793    7.04637 0.0000e+00
      7.000     1.2382   2.967662     2.6765        146    34.4404     1.2379    27.5795    7.04754 0.0000e+00
      8.000     1.2393   2.967814     2.6765        151    34.4405     1.2389    27.5795    7.04827 0.0000e+00
      9.000     1.2408   2.968015     2.6763        159    34.4408     1.2404    27.5797    7.04672 0.0000e+00
     10.000     1.2407   2.968047     2.6765        166    34.4408     1.2402    27.5797    7.06117 0.0000e+00
     11.000     1.2385   2.967885     2.6778        173    34.4405     1.2380    27.5795    7.06554 0.0000e+00
     12.000     1.2421   2.968278     2.6777        179    34.4410     1.2415    27.5798    7.05531 0.0000e+00
     13.000     1.2626   2.970323     2.6777        184    34.4440     1.2620    27.5807    7.05150 0.0000e+00
     14.000     1.2824   2.972315     2.6773        191    34.4471     1.2818    27.5818    7.03924 0.0000e+00
     15.000     1.2858   2.972675     2.6768        200    34.4474     1.2851    27.5819    7.04700 0.0000e+00
     16.000     1.2801   2.972155     2.6767        207    34.4463     1.2794    27.5814    7.04571 0.0000e+00
     17.000     1.2779   2.971975     2.6765        212    34.4459     1.2771    27.5812    7.04720 0.0000e+00
     18.000     1.2798   2.972230     2.6765        216    34.4465     1.2790    27.5815    7.05251 0.0000e+00
     19.000     1.2812   2.972418     2.6765        220    34.4468     1.2803    27.5817    7.05494 0.0000e+00
     20.000     1.2839   2.972703     2.6770        225    34.4469     1.2830    27.5816    7.05319 0.0000e+00
     21.000     1.2813   2.972513     2.6768        231    34.4467     1.2803    27.5816    7.05795 0.0000e+00
     22.000     1.2823   2.972637     2.6771        237    34.4466     1.2813    27.5815    7.05148 0.0000e+00
     23.000     1.2827   2.972720     2.6765        244    34.4466     1.2817    27.5815    7.04798 0.0000e+00
     24.000     1.2853   2.973022     2.6761        251    34.4470     1.2842    27.5817    7.04555 0.0000e+00
     25.000     1.2907   2.973577     2.6755        259    34.4476     1.2895    27.5818    7.04636 0.0000e+00
     26.000     1.2876   2.973354     2.6753        264    34.4475     1.2864    27.5819    7.05070 0.0000e+00
     27.000     1.2904   2.973669     2.6753        270    34.4479     1.2892    27.5820    7.05271 0.0000e+00
     28.000     1.2911   2.973820     2.6753        275    34.4485     1.2898    27.5824    7.05642 0.0000e+00
     29.000     1.2863   2.973371     2.6759        281    34.4474     1.2850    27.5819    7.06860 0.0000e+00
     30.000     1.2868   2.973430     2.6765        290    34.4471     1.2854    27.5816    7.06150 0.0000e+00
     31.000     1.2889   2.973703     2.6765        296    34.4477     1.2875    27.5819    7.06074 0.0000e+00
     32.000     1.2882   2.973671     2.6765        302    34.4475     1.2867    27.5818    7.06177 0.0000e+00
     33.000     1.2868   2.973612     2.6765        309    34.4476     1.2853    27.5820    7.06291 0.0000e+00
     34.000     1.2957   2.974500     2.6765        317    34.4486     1.2941    27.5822    7.06227 0.0000e+00
     35.000     1.2886   2.973864     2.6765        325    34.4477     1.2870    27.5819    7.06446 0.0000e+00
     36.000     1.2991   2.974959     2.6765        336    34.4496     1.2975    27.5827    7.06565 0.0000e+00