* Sea-Bird SBE 9 Data File:
* FileName = E:\CTD\Pos 437-1\Raw\POS_437_313.hex
* Software Version Seasave V 7.21f
* Temperature SN = 5456
* Conductivity SN = 3960
* Number of Bytes Per Scan = 34
* Number of Voltage Words = 3
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 09 2012 23:20:22
* NMEA Latitude = 67 17.76 N
* NMEA Longitude = 032 48.49 W
* NMEA UTC (Time) = Aug 09 2012  23:20:18
* Store Lat/Lon Data = Append to Every Scan
** Eisberg-CTD
* System UTC = Aug 09 2012 23:20:22
# nquan = 7
# nvalues = 196                         
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = timeJ: Julian Days
# name 3 = prDM: Pressure, Digiquartz [db]
# name 4 = t090C: Temperature [ITS-90, deg C]
# name 5 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 6 = sal00: Salinity, Practical [PSU]
# span 0 =   67.29618,   67.29686       
# span 1 =  -32.80843,  -32.80818       
# span 2 = 222.974069, 222.979255       
# span 3 =      2.000,    197.000       
# span 4 =    -1.5735,     2.6769       
# span 5 =    7.30295,    9.81936       
# span 6 =    27.5679,    34.2484       
# interval = decibars: 1                
# start_time = Aug 09 2012 23:20:18 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5456</SerialNumber>
#       <CalibrationDate>25-Aug-11</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33587676e-003</G>
#       <H>6.26373131e-004</H>
#       <I>1.94815265e-005</I>
#       <J>1.44150860e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3960</SerialNumber>
#       <CalibrationDate>30-Aug-11</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.04051473e+001</G>
#         <H>1.63886297e+000</H>
#         <I>-1.47716312e-003</I>
#         <J>2.16860313e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>50633</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <C1>-4.145101e+004</C1>
#       <C2>7.979210e-001</C2>
#       <C3>1.322120e-002</C3>
#       <D1>3.929800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.034126e+001</T1>
#       <T2>-6.976840e-005</T2>
#       <T3>4.210020e-006</T3>
#       <T4>2.667450e-009</T4>
#       <Slope>0.99942300</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.152000e-002</AD590M>
#       <AD590B>-8.603440e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4024</SerialNumber>
#       <CalibrationDate>20-Jan-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36056130e-003</G>
#       <H>6.62408028e-004</H>
#       <I>2.52646398e-005</I>
#       <J>2.29170754e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2166</SerialNumber>
#       <CalibrationDate>02-Feb-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.06899904e+001</G>
#         <H>1.40742510e+000</H>
#         <I>5.08653783e-003</I>
#         <J>-8.68146885e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>585</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Free -->
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2144</SerialNumber>
#       <CalibrationDate>08-Jul-11</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.9190e-001</Soc>
#         <offset>-0.5207</offset>
#         <A>-2.0406e-003</A>
#         <B> 6.0596e-005</B>
#         <C>-1.5321e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.5200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Oct 11 2012 10:07:33, 7.21a [datcnv_vars = 9]
# datcnv_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.hex E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.XMLCON
# datcnv_skipover = 3500
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# wildedit_date = Oct 29 2012 13:19:38, 7.21a
# wildedit_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 0.000e+000
# wildedit_npoint = 50
# wildedit_vars = prDM
# wildedit_excl_bad_scans = yes
# filter_date = Oct 29 2012 13:25:07, 7.21a
# filter_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM
# alignctd_date = Oct 29 2012 13:30:06, 7.21a
# alignctd_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.cnv
# alignctd_adv = c0mS/cm -0.010                                                                                                                                                                                                      
# celltm_date = Oct 29 2012 13:33:59, 7.21a
# celltm_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# Derive_date = Oct 29 2012 13:40:35, 7.21a [derive_vars = 2]
# Derive_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.cnv E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_281.XMLCON
# wfilter_date = Oct 29 2012 13:45:50, 7.21a
# wfilter_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.cnv
# wfilter_excl_bad_scans = yes
# wfilter_action t090C = median, 25
# wfilter_action t190C = median, 25
# wfilter_action c0mS/cm = median, 25
# wfilter_action c1mS/cm = median, 25
# wfilter_action sbeox0ML/L = median, 25
# wfilter_action sal00 = median, 25
# wfilter_action sal11 = median, 25
# binavg_date = Oct 29 2012 13:50:41, 7.21a
# binavg_in = E:\POSEIDON\POS437\POS437_1\CTD\IFM\POS_437_313.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*